Monday, March 30th 2020.
Fusion Splicer Ilsintech Swift KF4 is a very flexible and super accurate splicing machine that meets every aspect of connection requirements. At an affordable price and very light. Fusion Splicer Ilsintech Swift KF4 is Good Product for your work.
Features Fusion Splicer Ilsintech Swift KF4 :
Compact, Lightweight and Convenient
Best Active Cladding Alignment fusion splicer with slim and light form factor
l Size : 124(W) × 189(L) × 75(H) mm l Weight : 1.1 kg (Including battery)
l Splicing time : 7 sec l Heating : 13 sec (IS-60 mode, IS-60 sleeve)
With Work Table, maximizing the work efficiency.
Resistance to Shock, Dust and Water
The splicer with high reliability has stable performance even in a harsh environment.
l Shock – Free Fall : 76cm l Waterproof : IPx2 l Dustproof : IP5x
Resistance Wide LCD : 4.3 Inch
Heater Crystal clear and wide 4.3″ LCD.
| SPECIFICATIONS |
| Category |
Description |
| Fiber alignment |
Active Clad to Clad Alignment |
| Applicable type of fibers |
0.25mm, 0.9mm, 2.0mm, 3.0mm, Indoor cable |
| Fiber count |
Single fiber |
| Applicable fiber dimensions |
Cladding diameter: 125㎛ / Coating diameter: 150㎛~3mm |
| Fiber setting and cleaved length |
5mm to 16mm |
| Splicing modes |
Splice mode: 300, Heater mode:100 |
| Typical Splice Loss |
SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB |
| Return loss |
> 60dB |
| Splicing Time |
Typical 7sec With SM |
| Splice loss estimate |
Available |
| Sleeve heating time |
Typical 13sec with IS-60 mode, IS-60 sleeve |
| Applicable protection sleeve |
40mm,60mm and micro sleeves |
| Storage of splice result |
Date : Up to 5,000 (Image: Up to 5,000 pec) |
| Tension test |
1.96N to 2.25N |
| Operating condition |
Altitude: 5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
| Storage condition |
Temperature: -40℃~80℃, Humidity: 0~95% |
| Dimension |
124(W)ｘ189(L)ｘ75(H)mm(Without rubber protector) |
| Weight |
1.1kg(Including battery) |
| Viewing method and display |
Two CMOS cameras and 4,3-inch color LCD monitor |
| Fiber view and magnification |
X/Y : 130X MAX:260X |
| Power supply |
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger |
| No.of splice cycles with battery |
Typical 200 cycles |
| Electrode lifetime |
More than 21,000 times |
| Blade lifetime |
75,000 cleaves |
| Terminals |
|
